Series FS-PS
Gas Bottle cabinets made of glass fibre-reinforced polyester
Sandwich component construction 20 mm, thermal conductivity k = 1.2 W/m²K
- Self-supporting, frameless construction built with separate components, torsion-resistant, corrosion and seawater resistant
- Outstanding thermal insulation through the double shelled sandwich construction
- Gelcoat-surface for extreme life span, colour RAL 7035
- 1-leaf doors (...-10) protective system IP 65, 2-leaf doors (...-20) protective system IP 54
- Door frame with sturdy hinges, both made of stainless steel, door opening angle up to180°
- 3-point-latching with lift-and-swivel handle (closure no. 0526), prepared for half profile cylinder
- Threaded inserts M10 made of stainless steel inside of all walls
- Cabinet ventilation as standard equipment
- Hang-in-ramp to carry gas bottles into the cabinet
Manufacturing Program
Cabinet dimensions | Cabinet model | Quantity of gas bottle | |||||
H | x | W | x | D |
FS-PS 1000-500-10
|
3 pieces |
Extra Equipment
- Reduced electrical surface resistance in accordance with EN 60079-0 (<109Ω), necessary in ex-proof Zone 1
- Other dimensions on request
- Other RAL colour tone
- Profile-rubber sealed observation window made of laminated safety glass or acrylic glass in the door
- Double pane equipped window
- Other closure variations (see „Accessories“)
- Half profile cylinder
- Lifting eye bolts (see „Accessories“)
- Base frame made of stainless steel, height according to customers specification
- Fixing brackets made of stainless steel at the base frame (see „Accessories“)
- Larger roof overhang
- Door stop by pressurized spring (see „Accessories“)
- Electrical heating in normal and ex-proof design (see „Heating systems“)
- Steam or hot water heating (see „Heating systems“)
- Flat roof 20 mm thickness without overhang (50 mm in front only), cabinets can be erected in a row
- Components corresponding to fire resistance F30 or B1-DIN 4102
- Fixtures for attaching the gas bottles
- Additional c-formed steel for installing of pressure gas fittings
- In height adjustable floor for small gas bottles (10 l)
- Covered openings Ø 126 mm in the roof for piping valves, pipe connection pieces or for passing through of pipelines
- Pivoted ramp to carry gas bottles into cabinet
Series FG-P
Gas Bottle Protection Boxes
Single layer design, thermal conductivity k = 5 W/m²K
- Basic construction similar to protection box model P 4.210 Q, MO (oblong format, hinges at the top)
- Assembly-friendly and low maintenance, corrosion and seawater resistant
- Colour RAL 7032
- Two central draw latches made of stainless steel
- Two hood locking devices
- Four stainless steel mounting components in the rear wall for suspending the box and for fastening gas bottles and pressure gas fittings
- Window in the front of protective hood
- Opening Ø 250 mm for a standard gas bottle
Extra Equipment
- Reduced electrical surface resistance in accordance with EN 60079-0 (<109Ω), necessary in ex-proof-Zone 1
- Other RAL colour tone
- Without window in front
- Other closure variations
- C-formed steel for installing of pressure gas fittings and similar equipment
The technical documentation and the relevant approvals are available in the download area