Series E
Element cabinets made of glass fibre-reinforced polyester
Sandwich component construction 20 mm, thermal conductivity k = 1.2 W/m²K
- Self-supporting, frameless construction built with separate components, torsion resistant, corrosion and seawater resistant
- Outstanding thermal insulation through the double shelled sandwich construction
- Gelcoat surface for extreme life span, colour RAL 7035
- 1-leaf doors (...-10) protective system IP 65, 2-leaf doors (...-20) protective system IP 54
- Additional door in the rear side of the cabinet possible (...-11 or ...-22)
- Single door arrangement next to each other (...-10+10) and one above the other (...-10/10) possible
- Door frame with sturdy hinges, both made of stainless steel, door opening angle up to180°
- 3-point latching with lift-and-swivel handle (closure no. 0526), prepared for half profile cylinder
- Threaded inserts M10 made of stainless steel inside all wallsSelbsttragende, rahmenlose Konstruktion aus
- Einzelelementen, verwindungssteif, korrosions- und seewasserbeständig
Fertigungsprogramm
Cabinet dimensions | Cabinet model | ||||||
H | x | W | x | D * |
E 01-1000-*-10
|
* Depth D = 500 mm, 600 mm, 1000 mm
Other dimensions on request
Extra Equipment
- Reduced electrical surface resistance in accordance with DIN EN IEC 60079-0 (<109Ω), necessary in ex-proof Zone 1
- Other RAL colour tone
- Profile rubber sealed observation window made of laminated safety glass or acrylic glass in the door
- Double pane equipped window
- Other closure variations (see „Accessories“)
- Half profile cylinder
- Door stop by pressurized spring (see „Accessories“)
- Electrical heating in normal and ex-proof design (see „Heating systems“)
- Steam or hot water heating (see „Heating systems“)
- Cabinet ventilation systems (see „Accessories“)
- Mounting plate, sheet steel 2.5 mm, galvanized (see „Accessories“)
- Assembly rack, C-formed steel, cold galvanized (see „Accessories“)
- Internal door made of sheet steel, galvanized (see „Accessories“)
- 19“ swivel rack, sheet steel, laquered RAL 7035 or galvanized
- Lifting eye bolts (see „Accessories“)
- Base frame made of stainless steel, other heights on request
- Fixing brackets made of stainless steel at the base frame (see „Accessories“)
- Larger roof overhang
- Roof without overhang
- Enhanced fire protection upon request
- Overpressure design
- Cable distibution bases made of fiberglass reinforced polyester (see series „KVS“)
The technical documentation and the relevant approvals are available in the download area